Classic Car Parts - Rolls Royce & Bentley
Rolls Royce / Bentley Parts & Tools

New, Used & Hard to find Parts Available!

Contact us for all your parts enquiries

We are holding stock of many new and good servicable used parts.

Latest Parts : Contactless Ignition

Distributor Modification Kit. No need to replace points ever again! We have these kits in stock for the Rolls Royce Shadow.

Base Mounted Coil with 2 Screw Fixing For 20HP, 20/25 HP, 25/30HP Cars, Derby Bentley, Wraith & Phantom.

  • This coil has the correct impedance for the circuit.
  • No need to change Ballast Resister.

Coil Booster Lead

Originally made for the Merlin Spitfire Engine, Simply fits between the Coil and the Distributor. This HT Lead will boost the spark at the plug, causing a clean burn in the cylinders, resulting in a smoother more efficient running engine and giving more power and using less fuel.

  • Can be fitted to any engine with either positive or negative earth.
  • Improves Starting in both cold & wet weather conditions.

Coil Booster Lead

Phantom Clutch Plate, G76289

Our own High quality Clutch Plate made from modern aviation grade material. Fits Phantoms, and vehicles with 40/50hp Engine.

Phantom Clutch Plate, G76289

We also make the Clutch Plate for the 20/25 and 20 Horse Power Cars. Part Number G50218 20hp & Early 20/25hp, GB526 Late 20/25 & Wraith.

Thrust Bearing Sleeve, G76572

 

Thrust Bearing Sleeve - G76572

Made from modern aviation grade material. Fits Phantoms, and vehicles with 40/50hp Engine.

Part Number G76572

Our Own High Quality Nickel Chrome Steel Castellation Wheel Hub Rings LH & RH for 20 & 20/25 HP, Phantom Cars. These are of a harder modern aviation quality steel. This will not corrode unlike the original equipment, the modern material we use was not available when these cars were built. We also have the Circlip made from Marine Grade Stainless Spring Steel.

 

L/H and R/H Hub
Locking Ring

Part Numbers G53292,
G53291, G77445 and 75058

Rear Wheel Hub Retainer

 

Rear Wheel Hub Nut
Bearing Retaining -
20/25hp

Part Numbers :
G50304 and
G50305

Rear Wheel Hub Retainer

 

Spanner for
Rear Wheel Hub Nut
Bearing Retaining -
20/25hp

Fits Part Numbers :
G50304 and
G50305

Fan Pulley

Fan Pulley for
20/25hp and 25/35hp

These are made from
Aviation Quality Bright Steel
unlike the originals that go
brittle with age.

Fan Pulley Plates

Fan Pulley Plates
for 20hp and 20/25hp

These are made from
Aviation Quality Bight Steel
unlike the originals that go
brittle with age.

Nut for Rear Axle Tube
20/25hp 25/30hp + Phantoms

Part Numbers
G50912A and G50911A

Phantom Part Numbers
G2746A and G2745A

Rolls Royce
Castellation Nut

V8 Engines including Cloud II, Bentley S2, Bentley Continental S2

Crank Shaft Damper Nut
Part Number - UA 2756/Z

Rolls Royce
Castellation Nut

V8 Engines including Cloud II, Bentley S2, Bentley Continental S2

Crank Shaft Damper Nut
Part Number - UE5505


Castellation Nut for Derby Bentley and R-Type

MK6 & S1 Crank Shaft End Lock Nut Part Number - EB4202

Crank Shaft End Lock Nut

 

New Tools for Rolls Royce 20 and 20/25 HP, and Phantom Cars. These tools are made of Nickel Chrome Steel to a higher standard than the old tools. Our castellation spanners are now socket drive, will fit any socket set including air tools. This makes it easier when removing wheel bearings & hubs etc..

Our tools have been made for workshop use from modern materials, thereby you can save the life of the original tool kit. Original Units can damage easily and be difficult to use.


Socket Drive
Castleated Spanner

For Crank Shaft Spring Drive Damper Nut. MK 6 & S1

Part Number 1671/T1001

Crank Shaft Damper Nut, R2883


Socket Drive
Castleated Spanner

Crank Shaft Damper Nut. Derby Bentley & R Type.

Part Number R2883

Crank Extractor, R2879


Socket Drive
Crank Extractor

For Derby Bentley, R Type & MK 6.

Part Number R2879

Dynamo Drive Retaining Nut, R3166


Socket Drive
Castleated Spanner

Dynamo Drive Retaining Nut, Derby Bentley & R Type

Part Number R3166


Wheel Spanners

20hp, 20/25, Ghost, ect...

This is a workshop tool designed to take the hard knocks of workshop use.

 

Socket Drive
Hub Extractor Tool

Alternative for Silver Ghost,
20hp, 20/25hp ect...

Socket Drive Puller

 

Socket Drive Hub Puller for 20hp, 20/25hp - Part Number F55116

Phantom MKII Part Number F77153

 

Socket Drive
Hub Removal Tool
20/25hp & Derby Bentley
Part Number - R2828
Part Number - G51004
Part Number - R2841
(Phantom II)

Socket Drive Wheel Nut Castellation Spanner

20/25hp & Derby Bentley

Part Number - G52664

Part Number - G75544
(Phantom II)

Socket Drive Castellation Spanner V8 Engines including Cloud II, Bentley S2, Bentley Continental S2

Fits Crank Shaft Damper Nut
UA 2756/Z

Part Number - RH7131


Socket Drive Castellation Spanner V8 Engines including Cloud II, Bentley S2, Bentley Continental S2

Fits Crank Shaft Damper Nut UE 5505
Part Number RH7110

 

Socket Drive Castellation Spanner - Part Number G51001

Fits the Diff Drain Plug of the
20 HP & 20/25 HP Cars

 

Castellation Spanner
Part Number 1649-T10021
For Bentley MKVI Differential Locking Ring that holds the oil seal housing.

 

Rear Wheel Hub Nut Lock
Ring Compression Tool

for Silver Ghost & Phantoms

Socket Drive Core Plug Removal Tool

 

Socket Drive Core Plug Removal Tool

Fits across most of the engine range.


Socket Drive Spanner for Rolls Royce Silver Ghost

Modern Tool to replace the weak original U708 Tool.

Part Number U708


Multifunctional Spanner - As supplied in the Cloud Tool Kit, although this spanner fits across most model range.

This is a workshop tool unlike the toolkit version.

 

Socket Drive Shadow Brake
Pump Extractor

Part Number - RH8428

Water Pump Bearing Extractor



Suspension Compression Tool for Derby Bentley and Continentale

MK6 & S1 - Part Number - TBA

Water Pump Bearing Extractor

Water Pump
Bearing Extractor
Multifunction tool for Shadow,
Silver Dawn, Silver Wraith, Bentley MK6, R Type & S1

Rear Hub Drive Dog Extractor for 20/25hp Phantom III, Phantom II, Wraith
Same as R2831

Water Pump Bearing Extractor


Thermostat Extractor

Rolls Royce & Bentley MK6, R Type & S1

Other special tools for most marks of Rolls Royce & Bentley coming soon.

Fuel Ingot

Our Fuel Ingot is an amalgam of heavy metals orginally made for Ministry of Defence. This Fuel Ingot prevents Petrol going stale in the fuel tank of occasionally used vehicles. Petrol tends to deteriorate after only 2 months causing loss of octane resulting in poor starting, uneaven running and pinking under load.

  • Suitable for any type of cars, especially vehicles that need leaded fuel.
  • Just drop into the petrol tank and forget about it, lasts for 5 years.

Fuel Ingot Stale Petrol Stopper

For information on Our Parts and Component Overhaul Service, and manufacturing of one-off parts - Click Here

New, Used & Hard to find Parts Available!

We also supply parts and components for other Rolls Royce Engines. Marine Engines, Industrial & Gas Turbine Engines.

Contact us for all your parts enquiries

Email direct from your Email Client

Direct Email Address : info@charltonclassiccars.co.uk

Telephone . 01438 816466 - Mobile . 07956 374927

© charltonclassiccars.co.uk | Charlton Classic Cars | All Rights Reserved | another eleventybillion web.design.print